Table of Contents
Advertisement
GA-5BXWL-RH Motherboard
14 ) BAT1 (Battery)
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
15 ) CPU_FAN (CPU fan cable connector)
Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running
under abnormal condition or damaged by overheating.The CPU fan connector supports Max. current
up to 1A .
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
Pin No.
1
1
2
3
4
2 0
Definition
GND
12V
Sense
Control
Advertisement
Table of Contents
