Battery Information; Turning On And Off The Dakota - Garmin DAKOTA 10 Owner's Manual

Getting Started

Battery Information

Dakota units operate on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
NiMH or lithium batteries for best
results.
To install the batteries:
1. Slide the latch and remove the
battery cover.
Latch
2. Insert the battery. Align the
+ (positive) and - (negative)
markings on the device with the
battery.
3. Replace the battery cover.
2
To select the battery type:
1. Touch
2. Touch Alkaline, Lithium, or
Long-Term Storage
Remove batteries when you do not
plan to use the Dakota for several
months. Stored data is not lost when
batteries are removed.
Battery cover
Turning On and Off the
Dakota
1. To turn on the Dakota, press
2. To turn off the Dakota, press and
Setup > System
Type.
Rechargeable NiMH.
hold .
Dakota Series Owner's Manual
> Battery
.