Attaching A Carabiner, Lanyard, Mount, Or Other Optional Accessory; Calibrating The Touchscreen - Garmin DAKOTA 10 Owner's Manual
Graco gps receiver user manual
Hide thumbs
Also See for DAKOTA 10:
- Quick start manual (8 pages) ,
- Safety and product information (40 pages) ,
- Declaration of conformity (6 pages)
Table of Contents
Advertisement
Attaching a Carabiner,
Lanyard, Mount,
or Other Optional
Accessory
1. Position the accessory in the
slots on the mounting spine of the
Dakota.
Mounting
spine
2. Slide the clip up until it locks in
place.
To remove the clip, lift the bottom
of the clip and slide the clip off the
mounting spine.
Dakota Series Owner's Manual
Accessory
(carabiner)
Clip
Calibrating the
Touchscreen
The Dakota screen does not normally
require calibration. However, if the
buttons do not seem to be responding
properly, use the following process.
To calibrate the touchscreen:
1. While the unit is turned off, press
and hold
for approximately 30
seconds.
2. Follow the instructions on the
screen until "Calibration is
complete" is displayed.
Appendix
37
Advertisement
Table of Contents
