Configuring The Mainframe Host - Axis 5470e User Manual

AXIS 5470e User's Guide

Configuring the Mainframe Host

1. Specify the TCP/IP address space name.
2. Define the Communication Control Unit, e.g. 3172, to MVS.
3. Modify the TCP/IP profile on your MVS system, if necessary.
4. Verify the communication between the AXIS 5470e and the IBM Mainframe, by pinging
the AXIS 5470e from the host.
5. Define the AXIS 5470e as a writer-controlled printer to JES2 or to JES3.
JES2 Example:
FSS (FSS1) PROC=SAMPPROC,HASPFSSM=HASPFSSM,
PRT1 FSS=FSS1,MODE=FSS,PRMODE=(LINE, PAGE,),
CLASS=C,UCS=0,SEP=NO,SEPDS=NO,CKPTPAGE=100,
JES3(using JNAME=PRT1) Example:
FSSDEF,TYPE=WTR,FSSNAME=FSS3,PNAME=SAMPPRO3,SYSTEM=SYS1, TERM=NO
DEVICE,DTYPE=PRTAFP1,JNAME=PRT1,JUNIT=(,SYS1,,ON),FSSNAME=FSS3,
MODE=FSS,PM=(LINE,PAGE,),CHARS=(YES,GT12),
CARRIAGE=(TES,A868),CKPNTPG=100,HEADER=YES,WC=(C)
6. Define the printer to PSF with a PRINTDEV statement, including the IP address and port
number.
For a more comprehensive description of the setup procedures, refer to the AXIS 5470e
User's manual which is available from the Axis Web site at http://www.axis.com
START=YES,MARK=NO,TRKCELL=YES
23