AXIS 5470e User's Guide
2. Vary on the printer device by typing
3. Press F5 to refresh the display. The printer device should now be
4. Start the printer writer by typing STRPRTWTR AXISPR1 on the AS/400 command line.
Press Enter.
5. Press F5 to refresh the display. The printer device should now be
6. Direct a printout to this printer device. A successful printout verifies the communication
link between the AS/400 and the AXIS 5470e.
Note:
If the setup fails, please refer to the troubleshooting section in the AXIS 5470e User's Manual, supplied
on the Axis Web site at http://www.axis.com
Proceed to Management and configuration on page 47 for information on supported
management and configuration tools.
in the
field. Press Enter.
1
Opt
.
VARIED ON
.
ACTIVE/WRITER
25