Print Server Management Methods - Axis USB User Manual

Print Server Management Methods

Section 6 Print Server Management Methods
Configuration
Overview
Note:
34
The management and configuration tools that are supported by the AXIS
OfficeBasic USB allow you to:
• Change the print server parameters, i.e. editing the
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Perform a Factory Default of the print server
• Upgrade the AXIS OfficeBasic USB firmware. See
Firmware
, on page 47.
The method you should use to manage and configure your print server
depends on the operating systems and protocols of your network. The
table below displays which method to use for each supported
environment.
Protocol
TCP/IP (Windows )
AppleTalk over TCP/IP
AppleTalk, pre-MacOSX
TFTP are powerful tools for configuring the AXIS OfficeBasic USB. Refer to
the documentation for the TFTP server on your system for specific
information.
Updating the
Configuration/Management methods
Web Browser - See page 35
FTP - See page 39
Web browser - See page 35
Chooser - See page 29
AXIS OfficeBasic USB User's Manual
config
file