Management And Configuration; Using A Web Browser For Print Server Management - Axis 5400+ User Manual

Management and Configuration

Section 9 Management and Configuration
Configuration
Overview

Using a Web Browser for Print Server Management

User
84
The management and configuration tools that are supported by the Axis
Network Print Server allow you to:
• Change the print server parameters, i.e. editing the
• Receive extended information about the print jobs
• Receive printer port status
• Monitor your printers
• Reset the Axis Network Print Server
The method you should use to manage and configure your Axis Network
Print Server depends on the operating system protocols of your network.
The table below displays which method to use for each supported
environment.
Environments
TCP/IP
(UNIX, Windows, Mac OS)
IPX/SPX
(NetWare)
Windows
AppleTalk
Once you have established the Axis Network Print Server in the TCP/IP
environment, as described in "Assign an IP Address to the Print Server"
on page 14, you are free to access the Axis Network Print Server Web
pages from any standard Web browser.
The Web interface of the Axis Network Print Server is divided into two
modes of operation, User mode and Admin mode:
In User mode you can change language, but you have no rights to change
any other parameters. However, if you have access rights to the Admin
mode, you can change some of the basic parameters from User mode via
the Configuration Wizard. This mode is intended for regular users who are
only interested in using the print server's interface for checking print jobs
or viewing printer properties. If you want to change any other of the print
server's settings, you must enter the Admin mode.
config
Configuration/Management methods
Web Browser - See page 84
AXIS ThinWizard - See page 89
FTP - See page 91
Telnet - See page 93
SNMP - See page 95
Novell Utilities - See page 97
Web Browser - See page 84
Web Browser - See page 84
AppleTalk_cfg method - See page 43
Mac-FTP - See page 91
AXIS 5400+ / AXIS 5600+ User's Manual
file