Item Check List - Canon WFT-E1 Instruction Manual

Item Check List

Check that all the following items have been included with the WFT-E1. If anything is
missing, contact your dealer.
¢
Wireless File Transmitter WFT-E1
¢
Normal Antenna NA-E1
¢
Interface Cable IFC-15D4
Cable approx. 15 cm/0.5 ft long to connect to the <a> (IEEE 1394) port. Used when
the WFT-E1 is attached to the camera's tripod socket.
¢
Interface Cable IFC-150D4
Cable approx. 1.5 m/4.9 ft long to connect to the <a> (IEEE 1394) port. Used when
the WFT-E1 is placed some distance away from the camera.
¢
Interface Cable IFC-30U
Cable approx. 30 cm/1 ft long to connect to the <a> (USB) port.
¢
Protective caps for cable
Two types are provided for the WFT-E1 and camera (EOS-1D series).
¢
Tripod socket (with anti-rotation rubber pad)
Used when the WFT-E1 is attached to the camera's tripod socket.
To prevent rotational slippage, a rubber pad is inserted between the WFT-E1 and camera.
¢
Case
Case for the WFT-E1. Can be mounted on a belt. Strap also provided.
¢
WFT-E1/ WFT-E1A Utility Disk
Contains the instruction manual (what you are reading now) and software for creating the
settings file.
¢
Warranty card
* Battery Pack and Battery Charger are not included. If necessary, purchase them separately
(p.22).
* Be careful not to lose any of the items included with the WFT-E1.
¡
Canon and EOS are trademarks of Canon Inc.
¡
Windows is a trademark or registered trademark of Microsoft Corporation in the United States and
other countries.
¡
Macintosh is a registered trademark of Apple Corporation in the United States and other countries.
¡
WPA is a registered trademark of Wi-Fi Alliance.
¡
All other corporate names and trademarks mentioned in this manual are the property of their
respective owners.
3