Handling Precautions - Canon WFT-E1 Instruction Manual

Handling Precautions

Product Care and Storage
¡The WFT-E1 is a precision instrument. Do not drop it or subject it to physical shock.
¡The WFT-E1 is not waterproof and cannot be used underwater. If it gets wet, detach the
battery and promptly consult your nearest Canon Service Center. Wipe off any water
droplets with a clean, dry cloth. If the WFT-E1 has been exposed to salty air, wipe with
a well-wrung wet cloth.
¡Never leave the WFT-E1 near anything having a strong magnetic field such as a
magnet or electric motor.
¡Do not leave the WFT-E1 in excessive heat such as in a car in direct sunlight. High
temperatures can cause the WFT-E1 to malfunction.
¡Do not use cleaners that contain organic solvents to clean the WFT-E1. For stubborn
dirt, take the WFT-E1 to a Canon Service Center.
¡If the WFT-E1 will not be used for an extended period, remove the battery and store the
WFT-E1 in a cool, dry, well-ventilated location.
¡Avoid storing the WFT-E1 where there are corrosive chemicals such as a darkroom or
chemical lab.
LCD Panel Care
At low temperatures, the liquid-crystal display response may become slower. And at high
temperatures, the display may blacken. In either case, the display will return to normal at
room temperature.
Operation Restrictions
¡Use the WFT-E1 only with a compatible EOS digital camera. Using it with an
incompatible product may result in malfunction, accident, etc., not covered by the
product warranty.
¡Use the WFT-E1 only for image transfers via wireless LAN or wired LAN devices. If you
use the WFT-E1 for any other purpose, Canon cannot be held liable for any damage or
injury that may occur.
8