Table of Contents
Advertisement
Battery check
The remaining battery power is displayed when the camera is turned on.
Number of images that can be transferred
LAN
At Normal Temperature (23°C / 73°F)
Wireless LAN
Wired LAN
Using a fully charged LP-E6. The number of images that can be transferred is nearly the
same at normal temperature (23°C / 73°F) and low temperature (0°C / 32°F).
When automatic transfer is performed during shooting of an image of approx. 6.1 MB under
conditions based on the CIPA (Camera & Imaging Products Association) test standards.
Fewer images can be transferred when transferring images over a wireless LAN.
Fewer images can be transferred when using bus-power external media or GPS devices.
Removing the battery
Icon
Level (%)
100 - 70
69 - 50
49 - 20
19 - 10
9 - 1
0
2100
2400
Open the cover.
1
Slide the lever to open the cover.
Remove the battery.
2
Press the battery lock lever in the direction of the
arrow to unlock, and then unload the battery.
To prevent a short-circuit, be sure to always attach
the protective cover to the battery.
Installing and Removing the Battery
Status
Sufficient battery level
Battery level exceeds 50%
Battery level below 50%
Battery level is low
Battery will be exhausted soon
Recharge the battery
Approx. number of images
At Low Temperature (0°C / 32°F)
2100
2400
13
Advertisement
Table of Contents
