Rinnai Continuous Flow Water Heaters Operation Manual page 15

Kitchen Deluxe Controller
Voice prompts are only available when Deluxe Bathroom Controllers are
Setting the
installed.
sound options
To set the sound options press the 'Mode' button once to place the
controller into voice mode. Use the up and down buttons to select the
desired audible setting as follows:
•
•
To return to normal mode, press the 'Mode' button once, if no buttons are
pressed for approximately 10 seconds the controller will return to normal
mode.
Select the desired temperature using the 'Hot water temp.' up and down
Adjusting
buttons until the required temperature is displayed.
temperature
Once the hot water is running, if the set temperature is either too hot or
cold, press the 'Hot water temp.' up and down buttons until the desired
temperature is reached.
Rinnai New Zealand
Voice High, Med, Low or off, sets the voice prompt volume but does not
affect the 'beep' sound when pressing the buttons.
Sound Off, mutes all voice prompts and audible tones.
Continuous Flow Water Heater Operation Manual
15
01-09