Ipv6 Menu - Lexmark X790 series User Manual

Understanding printer menus
Menu item
Enable AutoIP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
Enable DDNS
Yes
No
Enable mDNS
Yes
No
DNS Server Address
Enable HTTPS
Yes
No

IPv6 menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > IPv6
Note: This menu is available only for network models or printers attached to print servers.
Menu item
Enable IPv6
On
Off
Auto Configuration
On
Off
Set Hostname
View Address
View Router Address
Enable DHCPv6
On
Off
Description
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enables the built-in FTP server, which allows you to send files to the printer using File
Transfer Protocol.
Note: Yes is the factory default setting.
Enables the built-in web server (Embedded Web Server). When enabled, the printer
can be monitored and managed remotely using a web browser.
Note: Yes is the factory default setting.
Lets you view or change the current WINS server address
Lets you view or change the current DDNS setting
Note: Yes is the factory default setting.
Lets you view or change the current mDNS setting
Note: Yes is the factory default setting.
Lets you view or change the current DNS server address
Lets you view or change the current HTTPS setting
Note: Yes is the factory default setting.
Description
Enables IPv6 in the printer
Note: On is the factory default setting.
Specifies whether the network adapter accepts the automatic IPv6
address configuration entries provided by a router
Note: On is the factory default setting.
Lets you set the hostname
Note: These settings can be changed only from the Embedded Web
Server.
Enables DHCPv6 in the printer
Note: On is the factory default setting.
158