Printing On Specialty Media - Lexmark X790 series User Manual

Printing
Supported flash drives and file types
Flash drive
• Lexar JumpDrive 2.0 Pro (256MB, 512MB, or 1GB sizes)
•
SanDisk Cruzer Mini (256MB, 512MB, or 1GB sizes)
Notes:
•
Hi‑Speed USB flash drives must support the Full‑Speed standard. Devices supporting only USB
low‑speed capabilities are not supported.
•
USB flash drives must support the FAT (File Allocation Tables) system. Devices formatted with NTFS
(New Technology File System) or any other file system are not supported.

Printing on specialty media

Tips on using letterhead
•
Use letterhead designed specifically for laser printers.
•
Print samples on the letterhead being considered for use before buying large quantities.
• Before loading letterhead, flex the sheets to prevent them from sticking together.
•
Observe proper page orientation.
Source
–
Standard 550‑sheet tray
–
Optional 550‑sheet tray
–
Optional 2000‑sheet
high‑capacity feeder
Duplex (two‑sided) printing
from trays
Multipurpose feeder (simplex
printing)
Multipurpose feeder (duplex
printing)
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable
for laser printers.
Print side
Preprinted letterhead design is placed
faceup.
Preprinted letterhead design is placed
facedown.
Preprinted letterhead design is placed
facedown.
Preprinted letterhead design is placed
faceup.
Paper orientation
The top edge of the sheet with the logo is
placed at the left side of the tray.
The top edge of the sheet with the logo is
placed at the right side of the tray.
The top edge of the sheet with the logo
should enter the multipurpose feeder
first.
The top edge of the sheet with the logo
should enter the multipurpose feeder last.
90
File type
Documents:
•
.pdf
•
.xps
Images:
• .dcx
•
.gif
•
.JPEG
• .jpg
•
.bmp
•
.pcx
•
.TIFF
• .tif
•
.png