Graco COMFORTSPORT ISPC054BA Instruction Manual page 16

FORWARD-FACING
WARNING
LATCH belt MUST be stored when
using vehicle seat belt to install
child restraint.
1
Store LATCH see page 25, fig. r.
2
Adjust child restraint to upright position (see
pages 18 and 19, fig. b) and place
forward-facing on vehicle seat.
3
Lift seat pad flap (available on some models).
Thread vehicle seat belt through openings.
Buckle belt (fig. a).
4
Press down firmly in center of child restraint to
compress vehicle seat cushion while tightening
vehicle seat belt.
Use your knee to press down in center of
child restraint (fig. b).
14
INSTALLATION WITH VEHICLE SEAT BELTS
5
Pull front to back and left to right to check for
secure installation (fig. c). Vehicle lap belt
MUST stay tight.
If not secure, see "Vehicle Seat Belts" page 26.
6
Attach tether strap hook (A) to anchor
hardware (B) and tighten adjustment belt to
remove any slack (fig. d) . If vehicle does not
have anchor points to attach tether hook,
tether hook should be stored, see "Tether
Storage", page 32.
Periodically check that child restraint is securely
installed; adjust if necessary.