About The Remote Control Unit; Operations Possible By Remote Control; Inserting The Batteries; Operating Range Of The Remote Control Unit - Denon DRA-F107 Owner's Manual

Am-fm stereo receiver
Hide thumbs Also See for DRA-F107:
Table of Contents

Advertisement

About the Remote Control Unit

Operations possible by remote control

Operations on the DRA-F107
n
Operating components connected to the DRA-
n
F107 by system cable
When the DCD-F107 CD player (sold separately) is connected to
the DRA-F107 by system cable, the remote control signals re-
ceived by the DRA-F107 are transmitted to the DCD-F107 to oper-
ate the DCD-F107.
For instructions on system connections, see "About System Functions"
(vpage 22).

Inserting the Batteries

q Remove the remote control
w Set two R03/AAA batteries in
unit's rear cover.
the battery compartment in the
indicated direction.
e Put the rear cover back on.
NOTE
• Replace the batteries with new ones if the set does not operate even
when the remote control unit is operated close to the unit.
• The supplied batteries are only for verifying operation.
• When inserting the batteries, be sure to do so in the proper direction,
following the "q" and "w" marks in the battery compartment.
• To prevent damage or leakage of battery fluid:
• Do not use a new battery together with an old one.
• Do not use two different types of batteries.
• Do not attempt to charge dry batteries.
• Do not short-circuit, disassemble, heat or dispose of batteries in
flames.
• If the battery fluid should leak, carefully wipe the fluid off the inside
of the battery compartment and insert new batteries.
• Remove the batteries from the remote control unit if it will not be in
use for long periods.
• Used batteries should be disposed of in accordance with the local
regulations regarding battery disposal.
Operating Range of the Remote Control
Unit
Point the remote control unit at the remote sensor when operating it.
30°
30°
Approx. 7 m
NOTE
The set may function improperly or the remote control unit may not
operate if the remote control sensor is exposed to direct sunlight,
strong artificial light from an inverter type fluorescent lamp or infrared
light.
ENGLISH


Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents