4.5.1 802.1p Tag Priority Mode
QoS settings allow customization of packet priority in order to facilitate delivery of data traffic that might be affected by
latency problems. When 802.1p Tag Priority is applied, the VDSL2 Switch recognizes 802.1Q VLAN tag packets and
extracts the VLAN tagged packets with User Priority value.
802.1Q Tag and 802.1p priority
TPID (Tag Protocol Identifier)
Destination
Preamble
Address
The IEEE 802.1p Tag Priority specification uses 2 priority levels to classify data packets. The screen in
appears.
User Priority
3 bits
TCI (Tag Control Information)
Source
VLAN TAG
Address
6 bytes
6 bytes
Figure 4-33 802.1p Tag Priority
Figure 4-34 QoS - 802.1p Tag Priority screen
User's Manual of VC-810S / VC-810S48
CFI
VLAN ID (VID)
1 bits
12 bits
2 bytes
Ethernet
Data
Type
4 bytes
2 bytes
56
2 bytes
FCS
46-1517 bytes
4 bytes
Figure 4-34