Paired Devices; Remove A Paired Device; Active Devices; Review The Active Devices List - Telefunken TX 101 User Manual

E. Paired devices
All paired devices are stored on the Paired devices list.
Up to four devices (one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list.
Once you have paired a device with the telephone base, you do not need to repeat the pairing
procedure
again unless you delete the device from the paired devices list.
Note: Only the first 15 characters of the device name are shown on the paired devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
1. In standby mode, Press MENU/OK and choose Bluetooth
2. Select Paired devices,
3. Select the device you want to rename
4. Select Rename and Press MENU/OK
5. The screen displays ENTER NEW NAME.
6. Use the keypad to edit the name
7. Press MENU/OK to confirm. The handset displays Device renamed.

Remove a paired device

If you want to add another Bluetooth device and you already have the maximum of four devices on
the paired devices list, you must first delete a device from the paired devices list.
1. In standby mode, Press MENU/OK and select Bluetooth
2. Select Paired devices,
3. Select the device you want to remove
4. Select Remove paired.
5. The screen displays Remove device from paired list? Press Menu/OK to confirm
6. The handset displays Device removed from paired list.
F. Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone
base. Although two paired devices can be connected to the telephone base, only one Bluetooth
mobile phone or a headset can be on a call at a time.
Note: When adding, removing, or replacing a Bluetooth device on the active devices list, all
connected devices are temporarily disconnected until the procedure is complete. It may take up to
two minutes to reconnect.

Review the active devices list

1. In standby mode, Press MENU/OK and choose Bluetooth
2. Select Active devices,
3. You can review the Active devices with UP/DOWN

Connect/disconnect an active device

While in the active devices menu, you may connect or disconnect your active device.
1. In standby mode, Press MENU/OK and choose Bluetooth.
2. Select Active devices.
3. Select the device you wish to connect/disconnect
4. Press MENU/OK to select Connect or Disconnect
5. Press MENU/OK to confirm. The handset displays Device connected/Device
disconnected.
TX Bluetooth 56