Bluetooth Setup; Pairing And Connecting A Mobile Phone - Telefunken TX 101 User Manual

paired with the telephone base; however, only two paired devices can be connected to the
base at a time.
Pairing
Sometimes refers to as bonding. The process of sharing registration information between
two Bluetooth enabled devices. Your Bluetooth enabled mobile phone or headset must first
be paired to the telephone base in order to use it with this cordless phone system.
PIN
By default, the PIN is 0000 for the telephone base and for most Bluetooth devices. PIN
information must be exchanged between Bluetooth devices before they can be used. This
is also known as a Passkey or Passcode.

Bluetooth setup

To use a Bluetooth enabled mobile phone with your TELEFUNKEN TX 1** , you must first pair and
connect your Bluetooth device(s) with the telephone base. All TX 1** handsets can be used to
make or answer calls on the mobile phone line.
Bluetooth wireless technology operates within a short range. When you pair a Bluetooth mobile
phone or Bluetooth headset to the telephone base, move closer to the telephone base to maintain
sufficient signal strength.
C. Pairing and connecting a mobile phone
Before you begin, make sure that :
- You have mobile coverage
- Your mobile phone is Bluetooth enabled and not connected to any other Bluetooth device
(laptop, headset...). Refer to your mobile phone User's Manual to learn how to search for or
add new Bluetooth devices.
1. In standby mode, press MENU/OK and select Bluetooth.
2. Select Add mobile.
3. Place your Bluetooth enabled mobile phone next to base and confirm by Menu/OK
4. If there are already four devices on the paired devices list, the display shows Maximum of
4 devices can be paired and prompts you to replace an existing paired device.
5. The screen displays Please set your mobile phone to search for devices, then press
again MENU/OK.
6. If a device is already connected to the telephone base, the screen displays Connected
device will be temporarily disconnected. Press MENU/OK to temporarily disconnect the
device and continue the pairing process.
7. Press MENU/OK to set the telephone base to discoverable mode.
8. Then, promptly turn on the Bluetooth feature of your mobile phone and search for or add
new devices.
9. Once your mobile phone finds TELEFUNKEN TX 1** , press the appropriate key on your
mobile phone to continue the pairing process.
10. Enter the PIN of the telephone base (the default PIN is 0000) into your mobile phone to
continue the pairing process.
- When a device is successfully connected, the handset displays Paired with mobile
and then Mobile setup completed Device connected.
- When you already have two active devices connected, the handset shows Maximum of
2 devices can be connected. You are prompted to replace an existing device on the
active devices list;
Note: The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different mobile phones. If this happens, follow the
TX Bluetooth 54