Audio Control; Pip Mode - Planet DVR-471 User Manual

4.1.4 Audio Control

Audio ON/OFF: Press the FUNCTION button and then press the "AUDIO (0)" button to
open/close the DVR audio function. You can hear audio of selected channel regardless of
monitoring screen.

4.1.5 PIP Mode

① Select a single camera in live view, and then press the PIP button and the following
screen will be displayed (For example: CH1).
② Select the desired camera that will be displayed on the PIP screen (For example: CH2,
but can not select the same camera with present (CH1)).
③ Press the ENTER button to make the 2 times PIP screen size and use the
buttons to move the position of PIP screen.
④ Press the ESC button to exit this mode.
28
CH2
CH1
, , ,
DVR-471 / DVR-1671 User Guide