Table of Contents
Advertisement
① REC PROGRAM: Select the RECORD PROGRAM (PROGRAM 0 ~ PROGRAM 9) you want, and
change the settings on your demand. QUICK SETUP use PROGRAM 0 as the record settings.
② IMAGE SIZE:
NTSC: 720x480/ 720x240/ 360x240
PAL: 720x576/ 720x288/ 360x288
③ Set the RECORD FRAME for each camera:
- NORMAL: Normal record frame.
- EVENT: Event record frame.
④ QUALITY: Set the record quality of normal recording and event recording. There are three record
qualities: Fine(F)/ Normal(N)/ Low(L).
⑤ PRE/POST: Set the time period of PRE RECORD TIME and POST RECORD TIME.
PRE RECORD TIME is 0~5 sec, the default is 5 sec. POST RECORD TIME is 0~60 sec, the default is 10
sec.
NOTE: The PRE RECORD TIME and POST RECORD TIME are not suitable in NORMAL RECORD mode.
⑥ EVENT TYPE: A: Alarm/ L: Video Loss/ M: Motion Detection / -: N/A.
Four channels are grouped and placed in one page. The resolution is revealed in gruops, which means, each
group consists of four channels have the same types of resolution. Other setting can be selected by each
camera. Move down to change to the next page or move curser to the botton of screen in order to click the
arrows.
4/16-ch H.264 Digital Video Recorder
Advertisement
Table of Contents
