Selecting A Destination From The Active Flight Plan; Selecting The Nearest Airport As A Direct-To Destination - Garmin GPS 400W,GNC 420W Pilot's Manual & Reference

Panel-mounted ifr navigation/communication system
Hide thumbs Also See for GPS 400W,GNC 420W:
Table of Contents

Advertisement

Selecting a Destination from the Active Flight
Plan
If you're navigating an active flight plan, any
waypoint contained in the flight plan may be selected
as a direct-to destination from the select direct-to
waypoint page. (see Section 4 - Flight Plans, for more
information on flight plans.)
To select a direct-to destination from the active
flight plan:
1.
Press the direct-to key. The select direct-to
waypoint page will appear, with the waypoint
identifier field highlighted.
2.
Turn the large right knob to highlight the
flight plan (FPL) field.
3.
Turn the small right knob to display a window
showing all waypoints in the active flight
plan.
Continue turning the small right knob to
4.
scroll through the list and highlight the desired
waypoint.
5.
Press ENT to confirm the selected waypoint,
and ENT to activate the direct-to function.
Selecting the Nearest Airport as a Direct-To
Destination
The select direct-to waypoint page always displays
the nearest airports (from your present position) on
the NRST field. Navigating directly to a nearby airport
is always just a few simple steps away. (Nearby airports
may also be selected as direct-to destinations using the
steps described Section 7 - NRST Pages - Navigating to
a Nearby Waypoint.)
To select a nearby airport as a direct-to destina-
tion:
Press the direct-to key. The select direct-to
1.
waypoint page will appear, with the waypoint
identifier field highlighted.
Turn the large right knob to highlight the
2.
nearest airport (NRST) field.
3.
Turn the small right knob to display a window
showing up to nine nearby airports.
4.
Continue turning the small right knob to
scroll through the list and highlight the desired
airport.
5.
Press ENT to confirm the selected airport, and
ENT to activate the direct-to function.
NOTE: Performing a direct-to for the MAP of an
active approach will cancel approach mode.
3 - DIRECT-TO
Selecting a Destination
63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400w seriesGnc 420w

Table of Contents