Electrical Connection; Water Connection; Permissible Water Pressure - Electrolux EWF 1080 User Information

Electrolux washing machine
Table of Contents

Advertisement

Electrical Connection

Refer to the rating plate for details of the mains volt-
age, current type and the necessary fuses. The rating
plate is located at the top behind the filling door.
;
This unit conforms to the following EU
directives:
– the "Low Voltage Directive" 73/23/EU
with changes
– the "EMC Directive" 89/336/EWG
with changes

Water Connection

The washing machine has safety features
3
which prevent contamination of the drinking
water and which conform to the legal regula-
tions of the water authorities (e.g. for Ger-
many: DVGW regulations). Other protection
measures in the installation are therefore not
necessary.
Attention!
– Units for connection to cold water must not be
connected to hot water!
– Use only new sets of hoses for connection!

Permissible Water Pressure

The water pressure must be at least 1bar (= 10N/
2
cm
= 0.1MPa), maximum 10bar (= 100N/cm
1MPa).
• In the case of more than 10bar: Connect a pres-
sure-reducing valve upstream.
• In the case of less than 1bar: Unscrew the intake
hose on the unit side on the inlet solenoid valve
and remove the flow regulator (to do this, remove
the filter with pointed pliers and remove the rub-
ber washer behind). Replace the filter.
34
ction
2
=

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents