Starting The Wash Programme; Wash Programme Progress - Electrolux EWF 1080 User Information

Starting the Wash Programme

1. Check that the stopcock is open.
2. Starting the wash programme: Press the START/
PAUSE (Start/Pause, Marche/Pause) button. The
wash programme starts.
If the END (Ende, Fin) light flashes 4 times
3
and at the same time an acoustic signal
sounds 4 times when the START/PAUSE
(Start/Pause,
pressed, the door is not closed properly. If
this happens, push the door firmly closed
and press the START/PAUSE (Start/Pause,
Marche/Pause) button again.

Wash Programme Progress

Programme Progress Display
Before the programme starts, the steps to be carried
out are indicated on the Programme Progress Dis-
play. During the wash programme, this indicates the
current stage of the programme.
Marche/Pause) button
mme
is
17