Go-Video GV8050 User Manual page 92

You may want to turn on your
On Screen Display to monitor
the Insert and Dub events. You
may also want to turn AUTO
PLAY/REW off to keep control of
the deck functions. The display
will not be recorded onto your
92
GO VIDEO REFERENCE GUIDE
Audio Insert
Tip:
1. Connect the source of your new audio (a tape player, for
example) to the Line 1 (front panel) or Line 2 (rear panel)
audio input jacks on the 8mm/VHS Dual-Deck VCR. See
the Audio Connections section of the Reference Guide for
hookup instructions.
2. Press
MENU
appears on the screen.
3. Move to the AUDIO INSERT item. Press
tape.
either Line 1 or Line 2. Press
system.
4. Insert your 8mm tape and a blank VHS tape. Prepare
your external audio source (start the tape, for example).
Press
COPY TAPE
The audio recorded on the VHS tape during Copy
Tape will come from the Audio Input jacks, and the
video will come from the 8mm deck.
Audio Dub
1. Connect the source of your new audio (a tape player, for
example) to the Line 1 (front panel) audio input jacks on
the 8mm/VHS Dual-Deck VCR. See the Audio Connec-
tions section of the Reference Guide for hookup instruc-
tions.
2. Insert the VHS tape.
3. Press
PLAY
4. Press
PAUSE
audio.
5. Press
DUB
DUB will blink on the Front Panel Display. The On
Screen Display will say DUB PAUSE.
6. Prepare your external audio source (start the tape, for
example).
until the AMERICHROME COPY MENU
QUIT
.
.
at the point where you want to replace the
on the VCR Front Panel (VHS side).
to choose
SELECT
to exit the menu