Go-Video GV8050 User Manual page 53

Automatic Editing Controls
You must have an 8mm tape inserted to use the Automatic
Editing keys.
Press to enter the 8-scene Automatic Assembly
SCENE
Editing screen. Press again to enter the Scene List.
While in the Scene List, press to cycle through the
list.
While in the Scene List, press to indicate the
BEGIN
beginning of a scene.
While in the Scene List, press to indicate the end of
END
a scene.
Clock/Counter Keys
See the Tape Counter and Memory Stop section of this
manual for more detailed information on the Tape Counter.
Press to toggle the Tape Counter Memory Stop for
MEMORY
the active deck on and off. M will appear on the On
Screen display Deck Status line for that deck.
Press to switch the Front Panel Display and
CLK/CTR
On Screen Display between the Clock, the Tape
Counter, and the Time Remaining, for the active
deck.
VHS Slow Motion Keys
Press either key during playback to enter slow motion
playback (VHS deck only). Press
playback.
Press to slow down slow motion playback. Each
- SLOW
press will slow the playback down a little more.
Press to speed up slow motion playback. Each
SLOW +
press will speed the playback up a little more.
to restore normal
PLAY
REMOTE CONTROL
53