Custom Titling - Go-Video GV8050 User Manual

Custom
Titling
_
ABCDEFG abcdefg 012345
- -
HIJKLMN hijklmn
6789?=
- -
OPQRSTU opqrstu ':()
- -
VWXYZ., vwxyz.,
- /*
- -
WHEN OK PRESS MENU
Note:
Press if you need
RESET
to backspace.
Tip:
Press while the title is
QUIT
recording if you want it to appear
for less than ten seconds.
Note:
Remember to set TITLER in the
Display Menu back to OFF after
you've placed your title.
You can create a title or caption of up to two lines, 16
characters each, and record it onto a VHS tape. You must
apply the title while you are recording from TV or from an
8mm tape.
There are two steps to Custom Titling. First, compose the
title. Second, record the title onto your tape.
Composing a Custom Title
1. Press until the AMERICHROME COPY MENU
MENU
appears. If your current TV View is VHS, you will have
to press more than once.
MENU
2. Press at the SET DISPLAY OPTIONS item to enter
SELECT
the DISPLAY MENU.
3. Press 2 to select SET TITLE MESSAGE, and press
to enter the Title Set Up editing screen.
4. Use the TRK/MENU
arrows down, and the TRK/MENU
right. Move to the letter, numeral, graphic, or space that
you want for the first character in your title. The charac-
ters will blink as you move the character choice arrows.
5. Press the key to set this first character and ad-
SELECT
vance to the next position. Press
continue advancing, for example to get to the second line.
6. Repeat steps 4 and 5 until you have composed your
entire message.
7. Press to save this message and return to the
MENU
DISPLAY MENU.
Recording a Title
1. In the DISPLAY MENU, move to item 3: TITLER, and
press to turn the Titler ON.
SELECT
2. Press to exit the menu system.
QUIT
3. While the VHS deck is recording (from any source), press
. The title will appear on the TV screen for about
SELECT
ten seconds, and will be recorded onto your tape.
key to move the character choice
key to move to the
repeatedly to
SELECT

CUSTOM TITLING

SELECT
21