Go-Video GV8050 User Manual page 86

If you are not getting a good
picture, try changing your TV and
the switch on the back of the
Dual-Deck VCR to channel 4.
Coaxial Cable
CABLE
OUTLET
CONVERTER
86
GO VIDEO REFERENCE GUIDE
8. Set the channel on the front display panel of your 8mm/
VHS Dual-Deck VCR to 2, 3, or 4. Call your cable
company to find out which of these channels to use.
9. Use your cable converter box to select any channel.
Tip: You should be getting a picture!
10. Press
MENU
channel memory (see these sections in this Guide).
IN FROM ANTENNA:
OUT TO TV :
DUAL-DECK VCR BACK PANEL
Advanced Cable Converter Box Hookup
This hookup is fairly complicated and is intended for ad-
vanced 8mm/VHS Dual-Deck VCR users. The advantage of
this hookup is that it allows you to record a non-scrambled
channel and watch that channel or a selected channel from
your cable box at the same time. A disadvantage of this
hookup is that it does not allow you to record premium
channels that require your cable converter box for
descrambling (you can still watch those channels).
This hookup is challenging because it requires you to use
different procedures for watching and recording TV pro-
grams than the procedures described in the 8mm/VHS Dual-
Deck VCR User's Guide. It also requires you to change
'control' back and forth between your Dual-Deck VCR and
your cable converter box.
to set the clock, the antenna, and the
MUL TIMEDIA
AUDIO
VIDEO
L R CONTROL
POR T
IN (LINE 2)
OUT
CH
3 4
Dual-Deck
VCR Cable
(supplied)
VHF/UHF
TV BACK PANEL