Go-Video GV8050 User Manual page 46

Note:
Sometimes the 8mm or VHS
indicator will be ON, but you will be
watching a TV or cable channel.
This is because when a tape is not
playing in a deck, the TV VIEW
shows the Record Source.
Clock/Counter/Time Remaining
The clock/counter display normally shows the clock time. The clock time displays in
hours and minutes, with AM and PM indicated. Pressing the CLK/CTR key once gives
you the tape counter for the active deck, in hours, minutes, and seconds. Pressing
CLK/CTR a second time gives you the amount of time remaining on the tape in the
active deck.
REM The REM indicator will be ON when the counter is showing the amount of time
remaining on the tape.
The LOOP indicator will be ON when you have set the VCR Play Mode to LOOP in the
LOOP
AUTO FEATURES Menu.
The SEQ indicator will be ON when you have set the VCR Play Mode to SEQ in the
SEQ
AUTO FEATURES Menu.
EDIT The EDIT indicator will be ON when the Automatic Edit feature is in use.
The COPY arrow will be on when you are copying an 8mm tape onto a VHS tape using the
COPY
Copy Tape key. The COPY arrow will BLINK if you press the PAUSE key or the SYNC
EDIT key during Copy Tape.
SAP The SAP indicator will be ON if the TV program being broadcast has a Second Audio
Program signal.
SAP SET The SAP SET indicator will be ON if you have selected the Second Audio Program
from a TV broadcast. Do this by changing the TUNER AUDIO selection to SAP or
TV+SAP in the TUNER/CHANNEL MENU.
STEREO The STEREO indicator will be ON if the TV program being received has a stereo
signal.
MONO The MONO indicator will be ON if you have selected MONO as the TUNER AUDIO
selection in the TUNER/CHANNEL MENU.
CATV The CATV indicator will be ON if you have selected STD CATV, HRC CATV, or IRC
CATV as your ANTENNA IN in the TUNER/CHANNEL MENU.
VCR The VCR indicator will be ON when the VCR is in VCR mode, and off when the VCR is
in TV mode.
CH The CH indicator tells you the channel to which your VCR is tuned.
46
GO VIDEO REFERENCE GUIDE
8mm Section
•
8mm VHS TUNER L1 L2
REM
•
•
S P
H M
•
Hi-8
•
Center Section
SAP CA TV
SAP SET
CH
A M
•
P M STEREO VCR
• MONO
S
L
LOOP E D I T
dB 00 -15 8
C O P Y
R
SEQ
VHS Section
•
8mm
T I M E R
•
REC
T U N E R
•
I D X L1
S L P
•
L2
DUB
2 0 2 6
Hi-Fi
•