ProForm 780 Ekg Bike User Manual page 19

THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor provides hands-free
operation and continuously monitors your heart rate
during your workouts. To purchase the optional
chest pulse sensor, call the telephone number on
the front cover of this manual.
INSTALLING THE RECEIVER FOR THE OPTIONAL CHEST PULSE SENSOR
If you purchase the optional chest pulse sensor, follow the steps below to install the receiver included with the
chest pulse sensor.
1. Remove the cover from the compartment on the bot-
tom of the Console (9).
Connect the wire on the receiver (A) to the wire in the
console.
2. Remove the paper from one side of the adhesive
pad, and press the pad onto the back of the receiver
(A). Then, remove the paper from the other side of
the adhesive pad and press the receiver onto the
interior wall of the Console (9) in the indicated loca-
tion.
Then, reattach the compartment cover.
Note: Any other wires that are included with the
chest pulse sensor may be discarded.
1
9
Cover
2
9
Attach
receiver
19
Console
A
Wire
A
Adhesive
Pad
here