Advertisement
REV-Dual and REV-Single Receiver Specifications
Controls
Front Panel:
Indicators: LCD Backlit Display
Connectors
Back Panel:
Antennas:
RF Specifications
Frequency Range:
Number of Channels:
Diversity:
Squelch:
RF Sensitivity:
FCC Type Acceptance:
Audio Specifications
Frequency Response:
Audio Output Level:
Balanced Output Adjustable
Unbalanced Output Adjustable
Distortion:
Signal to Noise Ratio:
Dynamic Range:
Other
REV-D Antenna Output:
Powered Antenna Inputs:
Internal Switching Power Supply:
CAN Bus Monitoring & Control:
Size:
On/Off, Menu, Set, Up, Down Buttons
1/4 in. Headset Jack with Selector and Volume
Group, Channel, Diversity, Label, Set-up
Transmitter Battery Level, Audio Signal
Amplitude and RF Signal Strength, Squelch,
Audio output levels, and instrument mode
1/4 in. unbalanced adjustable line level output
XLR balanced adjustable line level output
CAN Bus in and out port
TNC Detachable 1/2 wave
C1 Band 614 – 638 MHz (TV Channels 37-41)
C2 Band 650 – 674 MHz (TV Channels 44-47)
C3 Band 674 – 698 MHz (TV Channels 48-51)
C5 Band 722 – 746 MHz (TV Channels 56-59)
950 possible (programmable in 25kHz steps)
DSP PosiPhase True Diversity
Tone Code plus Adjustable Amplitude
<0.8uV for 12 dB SINAD
Approved under Part 15
100 – 15 kHz +/- 2 dB Microphone
30 – 15 kHz +/- 2 dB Instrument
10mV – 1V RMS Adjustable
8 mV to 0.755V RMS (100k ohm load)
Less that 0.5% (@ 1kHz, 40 kHz deviation)
> 110 dB (A)
>100 dB
TNC
TNC 12Vdc, 15mA
Universal Cord, 90–240 VAC, 50–60 Hz
RJ45 Jacks, REV-Link Software
1.72 in. H x 16 in. W x 12 in. D
43.7 mm H x 406.4 mm W x 304.8 mm D
Advertisement
