Table of Contents
Advertisement
Audio/Video
1.
Audio-out Jack allows this device to output audio or alerting sound.
Output Jack
The LAN socket is a RJ-45 connector for connections to 10/100Base-TX
Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect
RJ-45 LAN
or negotiate the transmission speed of the network automatically. Please
2.
Socket
use CAT-5 cable to connect the IP camera to a 100Mbps Fast Ethernet
network switch or hub. The ICA-HM100 LAN socket is compliant with
IEEE802.3af standard PoE interface.
3.
Power Jack
The input power is DC 12V.
This button is used to restore the all factory default settings. Sometimes
restarting the device will make the system back to a normal state.
However, if the system still got problems after restart, user can restore the
factory default settings and install it again.
Factory
4.
Default Reset
Hold it at least 5 seconds and release the tool. Then the device has been
restored to default settings and reboot again.
ICA-HM100W
Restore the device:
a. Insert the paper clip or other tool and press and hold the
button down continuously.
5
Advertisement
Table of Contents
