Dmx Mode; Power Cord Daisy Chain - American DJ PRO 64B User Instructions

PRO64B LED RC

DMX Mode:

Operating through a DMX controller gives the user the freedom to create
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The PRO64B LED RC
has 7 DMX modes: 1 Channel mode, 2 Channel mode, 3 Channel mode,
4 Channel mode, 5 Channel mode, 6 Channel mode, and a 7 Channel
mode. See pages 12-17 for each modes' DMX traits.
1. This function will allow you to control each individual fixture's traits
with a standard DMX 512 controller.
2. Press the MODE button unitl "CH.X" is displayed. "X" represents
the DMX Channel mode, i.e. "CH.5" is 5 Channel mode. Press the
UP or DOWN buttons to select your desired DMX Channel mode.
3. When you have found your desired channel mode wait at least 7
seconds, the display will begin to flash and the display will change
to address mode.
4. Using the UP or DOWN buttons set your desired DMX address.
5. Once your have found your desired DMX address plug in the fixture
via the XLR connections to any standard DMX controller.
6. Please see pages 12-17 for DMX values and traits.
PRO64B LED RC
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 40 fixtures maximum. After 40 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 9
© ®
Operating Instructions

Power Cord Daisy Chain

PRO64B LED RC ADJ LED RC Operating Instructions
The ADJ LED RC infrared remote has many differnet functions and gives
you complete control of your PRO64B LED RC. To control the your desired
fixture you must aim the controller at the front of the fixture and be no more
the 30 feet away.
BLACkOUT - Pressing this button will blackout the fixture.
AUTO RUN - This button will run an automatic program. While Auto Run is
active, the FLASH (strobe) mode can also be active, see FLASH below.
PROGRAM SELECTION - This button will let you access the units built-in
programs. Pressing this button to choose either seven color change, seven
color fade, or press this button to choose a static color. To control the speed
of the color change and color fade, press the "SP" (speed) button and then
press the "+" or "-" to adjust the speed of the fade or change.
To select a static color press the "PROG" button until no LED's glow then ei-
ther press the 1-7 buttons to select your desired static color or press the "+"
or "-" to scroll through the colors. 1 is red, 2 is green, 3 is blue, 4 is yellow, 5
is purple, 6 is cyan, and 7 is white.
Note: When using the "+" or "-" to scroll through the colors you will find ad-
ditional combo colors, i.e. red and blue, blue and green, green and red, and
red, green, blue.
FLASH - This button will activate the strobe effect. You can control the
flash rate by pressing the "+" and "-" buttons. Press this button again to exit
strobe mode.
SPEED - Press this button and use the "+" & "-" buttons to adjust the speed
of the programs. See PROGRAM SELECTION above.
DMX MODE - This button will let you select which DMX mode you want to
use. Some fixtures will come with different DMX channel modes. This button
will switch between the different modes. Please see pages 11-17 for DMX
control, modes, values, and traits.
SOUND ACTIVE - This button activates sound active mode.
SLAVE - This designates the fixture as a slave fixture in a master/slave con-
figuration.
SET ADDRESS - Press this button to set the DMX address. Press this but-
ton first, then press the numbers to set the address.
Example: DMX Address 1 Press "S001"
DMX Address 245 Press "S245"
R G B - Press either one of these buttons, and then press the "+" and "-" to
adjust the brighness.
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 10
© ®