Auto Mode; Sound Active Mode; Dmx Mode - American DJ Mega Bar LED RC User Instructions

Mega Bar LED RC
to either go to the next feature adjustment or to exit to the Program
menu. NOTE: This adjustment is only available with Program 12.
• When "C1.XX" is displayed you are adjusting the first color of the
color flow. Use the UP or DOWN buttons to adjust. The colors can
be adjusted from "C1.00" to "C1.07". Scroll through the colors to
find your desired color. Press the SETUP button when you are fin-
ished, to go to the next feature adjustment. "C2.XX" will be display-
ed you are now adjusting the second color of the color flow. Use
the UP or DOWN buttons to adjust. The colors can be adjusted
from "C2.00" to "C2.07". Scroll through the colors to find your de-
sired color. Press the SETUP button when you are finished, to exit
to the Program menu. NOTE: This adjustment is only available
with Programs 13 & 16.
• When "FT.XX" is displayed you are adjusting the fade time of the
program. Use the UP or DOWN buttons to adjust. The fade time
can be adjusted from "FT.01" the slowest, to "FT.99" the fastest.
Press the SETUP button when you are finished, to exit to the Pro-
gram menu. NOTE: This adjustment is only available with Pro-
grams 14-16.

Auto Mode:

1. Plug the fixture in and press the MODE button until "AUTO" is
displayed. You are now in AUTO mode and the fixture will now
cycle through the 13 built in programs.

Sound Active Mode:

In this mode the Mega Bar LED RC will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "SA.XX" is dis-
played. The fixture will now change color via sound.
2. You can press the UP or DOWN buttons to adjust the sound sensi-
tivity level. The flash rate can be adjusted from "SA.00" the least
sensitive, to "SA.31" the most sensitive.

DMX Mode:

There are six DMX Modes to choose from: 2 Channels, 3 Channels,
4 Channels, 6 Channels, 7 Channels, or 11 Channels. Operating
through a DMX controller give the user the freedom to create their
own programs tailored to their own individual needs.
American DJ® - www.americandj.com - Mega Bar LED RC Instruction Manual Page 9
©
Operating Instructions Mega Bar LED RC
1. This function will allow you to control each individual fixture's
traits with a Elation DMX 512.
®
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller.
3. Press the MODE button until "d.XXX" is displayed. Press the UP
or DOWN buttons to select your desired address. Once you have
set your desired DMX address press the SETUP button to choose
your desired DMX mode.
4. When you press the SETUP button "D-PX" should be displayed.
Press the UP or DOWN buttons to select your desired DMX mode.
The Modes go as follows: "D-P1" is 3 Channel mode,
"D-P2" is 4 Channel mode, "D-P3" is 11 Channel mode,
"D-P4" is 2 Channel mode, "D-P5" is 6 Channel mode, and
"D-P6" is 7 Channel mode.
5. Please see pages 13-17 for DMX values and traits.
ADJ LED RC:
This function is used to activate and deactivate the ADJ LED RC
(Remote Control). When this function is activated you can control the
fixture using the ADJ LED RC. Please see the next page for ADJ LED
RC controls and functions.
1. Plug the fixture in and press the MODE button until "Ir.XX" is dis-
played. "XX" represents either "on" or "oF" (Off).
2. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate (Off).
Mega Bar LED RC
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 26 fixtures maximum. After 26 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
American DJ® - www.americandj.com - Mega Bar LED RC Instruction Manual Page 10
©
Operating Instructions
Power Cord Daisy Chain