Advertisement
LED Matrix
Operating Modes:
The LED Matrix has 2 modes to choose from:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs. In this mode, the LED Matrix can only be
used as a Stand-Alone unit.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation
Show Designer™.
®
Sound Active Mode:
In this mode the LED Matrix will react to sound, and chase through
the different colors.
1. Plug the fixture in and put dipswitch #10 in the "ON" postion.
2. The fixture will now change via sound.
DMX Mode:
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs.
1. This function will allow you to control each individual fixture's
traits with a standard DMX 512 controller such as the
Elation
Show Designer™ or the Elation
®
2. The LED Matrix uses two DMX channels to operate see page 8
for the DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Set your DMX
address by using dipswitches 1-9 located on the side. Make sure
that dipswitch #10 stays in the "OFF" position. - Follow the set-
up specifications that come with your DMX controller.
4. To run more then one LED Matrix: Using standard XLR micro-
phone cables, daisy chain your units together via the XLR con-
nector on the rear of the units. Remember the Male XLR connec-
tor is the input and the Female XLR connector is the output. The
first unit in the chain will use the female XLR connector only - The
last unit in the chain will use the male XLR connector only. For
longer cable runs we suggest a terminator at the last fixture. All
units must be set to the same DMX address.
American DJ
- www.americandj.com - LED Matrix Instruction Manual Page 7
©
®
Operation
DMX Operator.™
®
LED Matrix
Channel Value
Function
1
0-9
Nothing.
10-19
7(W/R/G/B/C/M/Y) colors horizontal change to full screen.
20-29
R/G apart changed from each vertical line.
30-39
B/Y apart from each vertical line.
40-49
C/M apart from each vertical line.
50-59
R/W apart from each vertical line.
60-69
R/G/B/Y apart from each horizontal line.
70-79
W/B/C/M apart from each horizontal line.
80-89
7(W/R/G/B/C/M/Y) colors full screen changed by turns.
90-99
R/G apart from each small square
100-109
B/Y apart from each small square.
110-119
C/M apart from each small square.
120-129
R/W apart from each small square.
130-139
R/G/B apart from each small square.
140-149
C/M/Y apart from each small square.
150-159
7(W/R/G/B/C/M/Y) changed in random variable.
160-169
7(W/R/G/B/C/M/Y) changed to move in circle.
170-179
R/G changed like a pinwheel.
180-189
R/G & R/B changed like a pinwheel.
190-199
R background, W/G/B/C/M/Y scan changed in turn.
200-209
R background, G/Y/C/M scan changed in turn.
210-219
G background, R/B/C/Y scan changed in turn.
220-229
R/B & G/C apart from each vertical line.
230-239
R/G & W/B & C/Y changed in diagonal shape.
240-249
G/M & R/Y & B/M changed in diagonal shape.
250-255
Above all the variation.
0
Stop.
2
Speed Adjustment - The greater the value the faster the
1-255
speed.
American DJ
- www.americandj.com - LED Matrix Instruction Manual Page 8
©
®
DMX Traits
Advertisement
