Sound Active Mode; Auto Mode - American DJ PRO 64B User Instructions

PRO64B LED RC
LED Display On/Off:
To make the display stay ON all of the time
press the MODE and UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.
Operating Modes:
The PRO64B LED RC has 6 operating modes:
• Manual Color Mode - Select one of 7 different colors to remain
static.
• Color Change Mode - In this mode the unit will change through the
different colors. The change speed is adjustable.
• Color Fade Mode - In this mode the unit will fade in and out
through the different colors. The fade speed is adjustable.
• Auto Mode - In this mode the unit will change through the color
change and color fade.
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller such as
as the Elation Show Designer™.
®
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units built-in programs.
Any unit can act as a Master or as a Slave however, only one unit can be
programmed to act as the "Master."
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR microphone cables to link your units together.
Remember that the Male XLR connector is the input and the Female
XLR connector is the ouput. The first unit in the chain (master) will
use the female XLR connector only. The last unit in the chain will use
the male XLR connector only.
2. Set the "Master" unit to your desired mode or operation.
3. For the "Slave" unit(s), press the MODE button until "S.L.A." is dis-
played. When this is displayed your unit is set as a "Slave".
4. Connect the "Slave" unit or units and they will automatically start to
follow the "Master."
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 7
© ®
Operating Instructions PRO64B LED RC

Sound Active Mode:

In this mode the PRO64B LED RC will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "S.XX" is dis-
played. The fixture will now change color via sound.
2. You can press the UP or DOWN buttons to adjust the sound sensi-
tivity level. The level can be adjusted from "S.00" the least sensi-
tive, to "S.31" the most sensitive.
Manual Color Mode:
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until "C.L.X" is dis-
played. "X" = 0-7.
2. Press the UP or DOWN buttons to adjust "X" between 0-7.
Color Change Mode:
In this mode the PRO64B LED RC RC will change through the different
colors.
1. Plug the fixture in and press the MODE button until "J.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed
change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.
Color Fade Mode:
In this mode the PRO64B LED RC will fade in and out of the different
colors.
1. Plug the fixture in and press the MODE button until "F.XX" is dis-
played. "XX" = 01-99 which is the adjustable rate of the speed
change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change.

Auto Mode:

1. Plug the fixture in and press the MODE button until "A.--" is
displayed. You are now in AUTO mode and the fixture will now
cycle through the color change and color fade.
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 8
© ®
Operating Instructions