Troubleshooting - American DJ PRO 64B User Instructions

PRO64B LED RC
Blue
RGB
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 17
© ®
Photometric Charts PRO64B LED RC
First unplug the power. The fuse holder is located near the power
cord. Using either a phillips or flat-head screw driver unscrew the fuse
holder. Remove the bad fuse and replace with a new one.
PRO64B LED RC
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
2. Make sure that you are in Sound Active mode.
PRO64B LED RC
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
3. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
American DJ - www.Americandj.com - PRO64B LED RC User Manual Page 18
© ®
Fuse Replacement
Trouble Shooting
Cleaning