Switching Off - AEG Electrolux ARCT IS 82968- G A1 Operating Instructions Manual

DESIRED temperature means:
The temperature that is required in the appliance, this can be adjusted to the
temperatures shown in the display. The DESIRED temperature is indicated
by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the temperature that is currently present in
the appliance. The ACTUAL temperature is indicated with illuminated
numbers.
Once the TURBO/FROSTMATIC function has been switched on the
DESIRED temperature that was set originally cannot be changed.
The built-in temperature display shows the warmest temperature inside the
freezer. If the temperature is measured using a thermometer, put it between
the products since this will reflect the real temperature in the frozen
products. It is normal that the built-in temperature display shows a
temperature slightly above that measured in other ways.
If there is a fault in the appliance a square or a letter will appear in the
temperature display.

Switching off

To switch off press and hold the
ON/OFF button for approx. 1
second. A so-called "count down" is
TURBO
18
FROSTMATIC ALARM OFF
ON/OFF
started in the temperature display,
which counts backwards from "3" to
"1". After "1" is reached the
appliance switches off. Illumination
at the temperature display goes off.
Note:
The appliance cannot be switched on or off if unplugged, or if there is no
power being supplied to it. Following connection to the mains power supply,
the appliance returns to the same operating state as before the interruption of
main power.
If the appliance is not going to be used for an extended period:
1. Switch appliance off by pressing and holding the ON/OFF button for
approximately 1 second (see above).
2. Unplug or switch off at the mains supply.
3. Clean thoroughly (see section: "Maintenance and Cleaning").
4. Leave door open to avoid accumulation of odours.
AEGE 8183970-00/6
7