Installing The Cabinet - AEG Electrolux ARCT IS 82968- G A1 Operating Instructions Manual

Installing the cabinet

Make sure that the power plug is
not squashed or damaged by back
of the product.
A damaged power plug may
·
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
there is a risk of a short circuit and
·
fire.
If the power plug socket is loose, do
not insert the power plug.
there is a risk of electric shock or
·
fire.
To obtain the best performance
from the cabinet, ensure:
the cabinet is placed in a dry, cool
·
place and is not exposed to direct
sunlight.
the cabinet is not placed close to a
·
source of heat, e.g. a cooker or
dishwasher.
the cabinet is level. The cabinet
·
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
there is good air circulation around
·
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and
cupboard. In this case, the space
behind the cupboard must be at least
50 mm deep.
above the top
a)
23
b)
50mm
AEGE 8183970-00/6