Tuner Audio - Go-Video DDV9485 User Manual

Tuner Audio

Most television programs are
broadcast in stereo. However,
in certain circumstances, you
may wish to set the Tuner
Audio to mono, SAP or
TV+SAP.
34
DDV 9485 USER ' S GUIDE
1 Open "Setup Menu"
Press and hold the Menu button for 3 sec-
onds.
2 Select "Tuner & Channel List"
Press 3.
3
Select "Tuner Audio"
Press the down arrow until Tuner Audio is
selected.
4
Set "Tuner Audio"
Press the right arrow repeatedly to set Tuner
Audio to:
• Stereo — Two-channel Hi-Fi sound split
into left and right channels. When a show is
not broadcast in stereo, the sound reverts to
Mono.
• Mono — Monaural, or single-channel,
audio. Combines left and right audio
signals. Use when connecting the VCR to a
Mono output device, such as a monitor.
SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
____________________________________
/ = Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Stereo
Show Weak Channels No
Mono
Tuner Audio Stereo
SAP
____________________________________
TV + SAP
/ = Move = Sel MENU=Quit