Set Clock Manually - Go-Video DDV9485 User Manual

If Auto Clock Set is not avail-
able in your area, follow these
steps to set the clock manually.
If Auto Clock Set has set the
time incorrectly, try adjusting
Daylight Savings Time (page 9)
and Time Zone (page 10)
before setting the clock
manually.
1
Open "Setup Menu"
Press and hold the Menu button for 3
seconds.
2
Select "Set Clock Menu"
Press 1.
3
Turn Off "Auto Clock Set"
Press the right arrow key once. "Set Clock"
will replace "Time Zone" and "Clock Set
Channel."
4
Choose "Set Clock"
Press the down arrow key until "Set Clock"
is selected, then press the right arrow key to
select.

Set Clock Manually

SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move
SET CLOCK MENU
Auto Clock Set
Daylight Savings
Time Zone
Clock Set Channel
____________________________________
/ To Move
MENU to Quit
SET CLOCK MENU
Auto Clock Set
Daylight Savings
Time Zone
Clock Set Channel
____________________________________
/ To Move
MENU to Quit
SET CLOCK MENU
Auto Clock Set
Daylight Savings
Set Clock
____________________________________
/ To Move
MENU to Quit
INITIAL SETTINGS
= Sel MENU=Quit
On
Auto
Auto
Auto
To Select
On
Auto
Auto
Auto
To Select
Off
Auto
To Select
7