Go-Video DDV9485 User Manual page 77

To automatically cut commer-
cials when performing a Sync
Edit, see Skip Edit on the
following page.
6
Position Source Tape
Play the tape in Deck 1 to the beginning of
the segment you wish to copy, then press
Still. Use the special playback functions to
quickly find the position you want; see
page 44. Copy will flash on the front panel
display.
7
Start Sync Edit
Press the Copy Tape button. The tape in
Deck 1 will begin copying to Deck 2.
8
Pause/Resume Sync Edit
Press the Copy Tape button to pause the
Sync Edit. Copy will flash on the Front
Panel Display. To resume, press Copy Tape
again. With the Sync Edit paused, you can
reposition the source tape in Deck 1, e.g. to
fast-forward over a commercial.
9
Stop Sync Edit
To stop the Sync Edit process, press Stop on
both decks.
67
EDITING FEATURES