Impex Marcy PM-3800 Owner's Manual page 8

B.) Attach the pivot on the Backrest Support (#4) in the bracket opening on the Main
Seat Support (#3). Attach the pivots on the two Seat Supports (#8) to the bracket
from each side. Note: The pivots on the Supports need to face upward.
C.) Align the holes. Secure them together with one 8 ¼" Axle (#14), two Ø 1" Washers
(#54), and two M12 Aircraft Nuts (#52).
D.) Attach the pivot on Seat Incline Adjustment Frame to the side holes on the two
Seat Supports. Secure them together with one M12 x 6 ¾" Hex Bolt (#48), two Ø
1" Washers (#54), and two M12 Aircraft Nuts (#52).
E.) Securely tighten all Nuts and Bolts.
F.) Use the Seat Incline Lock Pin (#12) to hold the Seat Incline in position.
G.) Do not over tighten the Nuts and Bolts. Make sure the Backrest Support and
Seat Support can move freely.
STEP 3 (See Diagram 3)
7
DIAGRAM 2