Table of Contents
Advertisement
A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Connect the two Rack Base Frames (#27) by the Rear Base Frame (#30).
C.) Secure each end of Rear Base Frame to a Rack Base Frame with two M12 x 3 3/8" Hex Bolts
(#44), one 2 3/8" x 5 1/8" Bracket (#39), four Ø 1" Washers (#54), and two M12 Aircraft Nuts
(#52).
STEP 6 (See Diagram 6)
10
DIAGRAM 5
Advertisement
Table of Contents
