Impex Marcy PM-3800 Owner's Manual page 12

A.) Do not tighten Nuts and Bolts until instructed to do so.
B.) Attach one Front Vertical Frame (#28) to a Rack Base Frame (#27). Secure it from top with
two M10 x 5/8" Allen Bolts (#45) and two Ø ¾" Washers (#55). Secure it from side with two
M12 x 3 3/8" Hex Bolts (#44), four Ø 1" Washers (#54), and two M12 Aircraft Nuts (#52).
C.) Repeat B to install the other Front Vertical Frame on the other side.
STEP 7 (See Diagram 7)
A.) Do not tighten all Nuts and Bolts until instructed to do so.
11
DIAGRAM 6