Brinkmann Elite Owner's Manual page 27

Figure 1
Figure 3
Figure 4
M4
Washer
Wing Nut
Side
Burner
M4 Washer
M4 Nut
Electrode
Side Burner
Igniter Lead
Step 12
To install the side burner, remove
the pre-attached nut and
M4 washer on the side burner and
install the side burner
(Figure 1). Attach one M4 bolt
(silver) to secure the tip of the side
burner (Figure 2). Attach one
M4 x 10 mm bolt (silver) from the
top of the side burner to secure in
place (Figure 3). Attach two
M4 washers and one M4 nut and
one wing nut to secure the side
burner(Figure 4).
Figure 2
Bolt
Step 13
Attach side burner igniter lead
to electrode on bottom of side
burner.
26