Section 5
Maintenance
Drive Belt
The dive belt is considered a wearable item.
Replacement intervals depend on vehicle use and
environment. If your belt is slipping you may need to
replace it.
1. P
ark vehicle on a level surface, set park
place shifter in Neutral, turn off ignition switch,
and remove switch key.
2. Remove the upper belt covers. (It is not
necessary to remove the bot
3. "Walk" the belt off of the rear pulley as sh
Figure 5-6.
brake,
tom cover.
Figure 5-6
4. Install the new belt on the front pulley first and
"walk" it onto the rear pulley.
5. Reinstall the belt guards. Figure 5-7.
own in
Attention: Failure to reinstall the belt gua
void your warranty.
rds may
Figure 5-7
19