Making Intercom Calls; On An Intercom Call - BT SYNERGY 1400 User Manual

Making intercom calls

You can make intercom calls to handsets
registered to the same base station.
To call another handset
Press buttons in order shown
Press the
flashes INT and you hear a continuous
tone (in the earpiece).
Enter the handset number you want
). Display shows INT CALL and the
(
1-6
number of the handset you are calling.
The other handset rings. If there is no
answer after 30 seconds, the call is
ended.
To answer an intercom call
The handset rings. Display shows INT
CALL (display flashes INT) and the
number of the handset calling you.
Press the
Or
Lift the handset off the base station or
charger.
To end an intercom call
Press the
Or
Replace the handset on the base station
or charger.
48
button. Display
INTERCOM
button.
INTERCOM
button.
INTERCOM
Making and receiving
external calls while

on an intercom call

To receive an external call
While on an intercom call:
You hear the call waiting tone in the
earpiece. The base station rings.
The calls light flashes. The display
flashes .
Press the button to answer the
TALK
call. The intercom caller is put on hold
and the display flashes INT and the
main part of the display goes blank.
To end the external call, press the
button. You will then be returned to the
intercom call.
To make an external call
If you need to make an external call
while on an intercom call:
Press the button to put your
TALK
intercom caller on hold, display flashes
INT and shows
of the display goes blank.
Dial the external number to make your
call.
Press the button to end the
TALK
external call.
TALK
and the main part