Table of Contents
Advertisement
Using the answering machine
Before using your answering machine for the
first time you need to: set the time and date,
record your outgoing message (OGM) and
switch the answering machine on.
The base stations answering machine is shared
by all handsets. There are two types of
answering machine mode:
Answer and record – Callers can leave you
messages.
Answer only – Callers will hear your
outgoing message but cannot leave any
message.
Each answering machine mode has its own
outgoing message.
It is necessary to record your own outgoing
message as the machine has no pre-recorded
message. Also it is not possible to switch on
the answering machine if you have not
recorded an outgoing message for the mode
you have selected. If you attempt to do this
will appear on the display.
The answering machine has an incoming
message capacity of approximately 15 minutes.
'To set the time and date'.
Before proceeding it is necessary to
choose which answering machine mode
you will be using. (Answer only or
Answer and record). It is possible to
record a message for both modes
although only one mode can be on at
a time.
It is not possible to switch on the answering
machine if you have not recorded an outgoing
message for the mode you have selected.
If you attempt to do this
on the display.
L
Use the
or
M
to
Press
to confirm.
L
Use the
or
M
to
.
Press
to confirm.
Display will show
Press
to confirm.
L
Use the
or
M
to
Press
, you will hear a beep in the
earpiece. Speak your outgoing message.
Press
to stop recording.
Your outgoing message will be
automatically played back through the
handset earpiece.
You can stop the outgoing message
playback by pressing
will appear
button to scroll
.
button to scroll
.
button to scroll
or
.
.
22
Advertisement
Table of Contents
