Call Screening At The Handset; Adjust The Incoming Message Length; Remote Access; Remote Access On / Off - BT HUDSON 1500 User Manual

Call screening at the handset

If handset call screening has been turned on, you will be able to
listen to the caller recording their message via the handset by
pressing SCreen.
If you want to speak to the caller, press
their message.

Adjust the incoming message length

The incoming message length (ICM) is set at the default of 3
minutes. You can change this to 2 minutes if you want to.
1. Press Menu, scroll
2. Scroll to
AnS SettingS
3. Scroll to length. Press SeleCt.
iCM
4. Scroll or to choose either
Press SeleCt.
5. Press to return to the previous menu level.
BACk

Remote access

When switched on, you can call in from another phone to listen to
your messages and operate your answering machine.

Remote access on / off

You can switch remote access on or off. When on, you can operate
your answering machine from any other Touchtone
Default setting is On.
1. Press Menu, scroll
2. Scroll to
AnS SettingS
3. Scroll to
reMote
4. Scroll or to
5. Press to return to the previous menu level.
BACk
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
as they are leaving
to MAChine. Press SeleCt.
AnSwer
and press SeleCt.
2 MinS
to MAChine. Press SeleCt.
AnSwer
and press SeleCt.
ACCeSS. Press SeleCt.
or DeACtivAte. Press ok.
ACtivAte
or
3 MinS.
phone.
TM
36