Declaration Of Conformance; Connecting To A Switchboard; Inserting A Pause; Recall - BT HUDSON 1500 User Manual

53

Declaration of Conformance

Hereby, CCT declares that this BT Hudson 1500 is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
If you would like a copy of the Declaration of Conformance, please visit www.bt.com/producthelp

Connecting to a switchboard

This product is intended for use within the UK for connection to the public telephone network
and compatible switchboards, which support tone and pulse dialling and timed break recall. If in
doubt please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access code you may have to wait for a moment while
the switchboard picks up an outside line so you will need to enter a pause in the dialing sequence.
Press and hold to insert a pause (P) before entering the telephone number.
You may also need to enter a pause when storing international numbers or charge card numbers.

Recall

You may need to use the recall function if you are connected to a switchboard/PBX (Private
Branch Exchange), contact your PBX supplier for further information. The recall function is set to
timed break recall and is also used for BT Calling Features.

User Guide formats

This document is also available in other formats, such as Large print, Braille and Audio CD.
If you would like a copy, please call 0808 100 6556*.